Sensepeek 6012 - PCBite Kit with 2 SQ10 probes for DMM

A complete PCBite kit with two complete hands-free SQ10 probes with one red probe and one black probe (positive and negative) packed with a set of red/black banana cables intended to be directly connected to a multimeter or power supply. The kit also includes an insulation cover for the base plate.

The new SQ series of hands-free PCBite probes from Sensepeek are insulated, come with color-coded cable holders included, and have a lower center of gravity, making them even more stable compared to the original SP probe series. All the beloved features of hands-free measurement, from the fine interchangeable spring-loaded test needle to the minimalist design, are retained to render traditional-sized and portable probes obsolete. All Sensepeek hands-free probes facilitate instant measurements or long triggering sessions. No more soldering wires to connect your probe or complicated tools to set up, just position the probe needle on any test point or component in the signal path and release it. Save time and frustration during development, testing, and repairs. The minimalist design and spring-loaded test needle allow for simultaneous measurement of fine pitch components and close signals. The length and weight of the SQ probes are perfectly balanced for use with the included PCB holders and base plate, which are essential for hands-free operation. The probe holder comes with a strong magnet in the base, as with all PCBite probes and holders, making it easy to place and reposition the probe. The SQ probe series can be used by hand without the probe holder as they have an insulated handle, but their full potential is realized when used for hands-free measurement. One side of the included base plate is matte and the other is mirror polished. The mirror-polished surface allows for easy viewing of components on the underside of the circuit board. For additional protection during measurement, the included insulation cover can be mounted on one of the surfaces. See the user guide for specifications.

Delivered with:
- 4 x PCBite PCB supports
- 1 x set of yellow insulating washers for PCB supports
- 1 x large base plate (A4)
- 1 x insulating cover for the base plate (A4)
- 1 x microfiber cloth
- 2 x SQ10 probes and pointed test needles (red/black)
- 2 x banana to dupont test wires (red/black)
- 1 x set of cable supports (red/black)
- 2 x additional test needles