Laser cutting 300 x 400 mm 60W LS3040

A3 format for more possibilities.
Compact, can be placed on a desk, you can engrave and cut your materials in a maximum format of 300 x 400 mm, up to 10 mm thick. (For acrylic materials: PMMA,...)
60 W laser power.

Operation
CO2 laser cutting is a gas laser whose tube, cooled by water, is made up of an electrically excited carbon dioxide gas mixture.
During cutting or engraving, it is important to continuously cool the laser tube (A basic solution is provided in all our machines; however, we recommend the use of a regulated water cooler) and evacuate all fumes. (Either through an external duct if the establishment is equipped, or through a standalone extractor equipped with filters)

Usage and materials
Of high quality with precision, CO2 laser cutting is suitable for cutting or engraving various materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will damage your machine. If in doubt, you must consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by polytech-oscilloscopes is at your own risk and will result in the cancellation of the warranty.

Safe and simple use
No chips, 'clean' cutting and engraving.
Quick execution.
All our machines comply with CE standards.
Guarded cover.
Key opening.
Emergency stop.
French signage.
Key-operated start / stop.

Composition:

- 1 Laser cutting LS3040

- 1 Air compressor

- 1 Water pump

- 1 Extraction turbine for external duct with flexible tube

- 1 RDworks software

- 1 Manual in French

Warranty information: any consumable, wearable part is not covered by warranty. Non-compliant use or the use of materials not recommended by polytech-oscilloscopes is at your own risk and will result in the cancellation of the warranty.