Laser cutting 1200 x 900 mm 150W LS1290

Power and Large Working Area
Practical and functional with its wheeled cabinet, you can engrave and cut your materials in a maximum format of 1200 x 900 mm, up to 20 mm thick. (For acrylic materials: PMMA,...)
150 W laser power.

Operation
CO2 laser cutting is a gas laser whose tube, cooled by water, is made up of an electrically excited gas mixture of carbon dioxide.
During cutting or engraving, it is important to continuously cool the laser tube (A basic solution is provided in all our machines; however, we recommend the use of a regulated water cooler) and evacuate all fumes. (Either through an external duct if the facility is equipped, or using a standalone extractor equipped with filters)

Usage and Materials
Of high quality with precision, CO2 laser cuts are suitable for cutting or engraving many materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will damage your machine. If in doubt, you must consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by Jeulin is at your own risk and will void the warranty.

Safe and Easy to Use
No chips, 'clean' cutting and engraving.
Fast execution.
All our machines comply with CE standards.
Interlocked cover.
Key opening.
Emergency stop.
French signage.
Key-operated On/Off switch.