Laser cutting 1200 x 900 mm 80W LS1290

Power and large working area
Practical and functional with its wheeled cabinet, you can engrave and cut your materials in a maximum format of 1200 x 900 mm, up to 20 mm thick. (For acrylic materials: PMMA,...)
80 W laser power.

Operation
CO2 laser cutting is a type of gas laser whose tube, cooled by water, is made up of an electrically excited gas mixture of carbon dioxide.
During cutting or engraving, it is important to constantly cool the laser tube (A basic solution is provided in all our machines; however, we recommend using a regulated water cooler) and to evacuate all fumes. (Either through an external duct if the establishment is equipped, or with a standalone extractor equipped with filters)

Usage and materials
Of high quality with precision, CO2 laser cutting is suitable for cutting or engraving numerous materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with the addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will damage your machine. If in doubt, you should consult the COSHH / health and safety datasheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by Polytech is at your own risk and will void the warranty.

Safe and easy to use
No chips, 'clean' cutting and engraving.
Quick execution.
All our machines meet CE standards.
Interlocked cover.
Keyed access.
Emergency stop.
French signage.
Key-operated start / stop.