Hybrid laser cutting M1 385 x 300 mm 10W Makeblock

The Makeblock M1 is a hybrid laser cutter, it allows for engraving or cutting functions using its 10W laser diode, which is powerful enough to cut an 8mm thick linden plywood sheet in a single pass. The plotter function will enable cutting vinyl film for sticker creation or flex film for clothing flocking and even leather cutting. Equipped with a camera, the M1 will capture the image or drawing on the platform and transfer it to the software!

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with added ceramic spray)

NEVER cut or engrave materials containing PVC or vinyl; a corrosive agent (Chlorine) will damage your machine. If in doubt, you must consult the COSHH / health and safety datasheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by Jeulin is at your own risk and will void the warranty.

Safe and easy to use
No chips, 'clean' cutting and engraving.
Quick execution.
Interlocked cover.

• 1 Makeblock M1 laser cutter.
• Set of 5 45° blades for the plotter.
• 1 blade holder.
• 2 cutting mats.
• 1 flexible hose for external exhaust.
• 1 start-up manual.
• 1 software to download.
• Various material samples.

Delivered without smoke purifier (optional).

Warranty information: any consumable, wear part is not covered by the warranty. Non-compliant use or the use of materials not recommended by Jeulin is at your own risk and will result in warranty cancellation.