Laser cutting 300 x 400 mm 35W LS3040

A3 format for more possibilities.
Compact, suitable for placement on a desk, you can engrave and cut your materials in a maximum format of 300 x 400 mm, up to 20 mm thick. (For acrylic materials: PMMA, ...)
35 W laser power.

Operation
CO2 laser cutting is a gas laser whose tube, cooled by water, is made up of a gas mixture of electrically excited carbon dioxide.
During cutting or engraving, it is important to continuously cool the laser tube (A basic solution is provided in all our machines; however, we recommend the use of a regulated water cooler) and evacuate all fumes. (Either using an external duct if the establishment is equipped, or using a standalone extractor equipped with filters)

Usage and materials
Of high quality and precision, CO2 laser cutting is suitable for cutting or engraving many materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA, ...
- Engraving only:
Glass, stone, metal (with added ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will destroy your machine. If in doubt, you should consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by polytech-oscilloscopes is at your own risk and will result in the cancellation of the warranty.

Safe and easy to use
No chips, 'clean' cutting and engraving.
Fast execution.
All our machines meet CE standards.
Interlocked cover.
Key opening.
Emergency stop.
French labeling.
Key-operated on/off switch.

Composition:

- 1 Laser cutting machine LS3040

- 1 Air compressor

- 1 Water pump

- 1 Extraction turbine for external duct with flexible tube

- 1 RDworks software

- 1 User manual in French

Warranty information: any consumable, wear part is not covered by the warranty. Non-compliant use or the use of materials not recommended by polytech-oscilloscopes is at your own risk and will result in the warranty being voided.