Laser cutting 600 x 900 mm 80W LS6090

Power and large working area
Practical and functional with its wheeled cabinet, you can engrave and cut your materials in a maximum format of 600 x 900 mm, up to 20 mm thick. (For acrylic materials: PMMA,...)
80 W laser power.

Operation
CO2 laser cutting is a gas laser whose tube, cooled by water, is made up of an electrically excited gas mixture of carbon dioxide.
During cutting or engraving, it is important to continuously cool the laser tube (A basic solution is provided in all our machines; however, we recommend the use of a regulated water cooler) and to evacuate all fumes. (Either through an external duct if the facility is equipped, or through a standalone extractor equipped with filters)

Use and materials
Of high quality with precision, CO2 laser cuts are suitable for cutting or engraving many materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with the addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will destroy your machine. If in doubt, you should consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by Polytech is at your own risk and will result in the cancellation of the warranty.

Safe and simple use
No chips, 'clean' cutting and engraving.
Fast execution.
All our machines comply with CE standards.
Interlocked cover.
Key opening.
Emergency stop.
French signage.
Key-operated on/off switch.

Composition:

- 1 Laser cutting machine LS6090

- 1 Air compressor

- 1 Water pump

- 1 Furniture on wheels

- 1 Extraction turbine for external duct with flexible tube

- 1 LaserCut software

- 1 Manual in French

Warranty information: any consumable, wear part is not covered by the warranty. Non-compliant use or use of materials not recommended by Polytech is at your own risk and will result in the cancellation of the warranty.