Laser cutting 600 x 900 mm 130W LS6090

Power and Large Working Area
Practical and functional with its wheeled cabinet, you can engrave and cut your materials in a maximum format of 600 x 900 mm, up to 20 mm thick. (For acrylic materials: PMMA,...)
130 W laser power.

Operation
CO2 laser cutting is a gas laser whose tube, cooled by water, is made up of an electrically excited carbon dioxide gas mixture.
During cutting or engraving, it is important to continuously cool the laser tube (A basic solution is provided in all our machines; however, we recommend using a regulated water cooler) and to evacuate all fumes. (Either through an external duct if the facility is equipped, or with a self-contained extractor equipped with filters)

Usage and Materials
Of high quality with precision, CO2 laser cuts are suitable for cutting or engraving many materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will destroy your machine. If in doubt, you should consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by Polytech is at your own risk and will result in the cancellation of the warranty.

Safe and Easy to Use
No chips, 'clean' cutting and engraving.
Fast execution.
All our machines comply with CE standards.
Interlocked cover.
Key opening.
Emergency stop.
French signage.
Key-operated On / Off switch.

Composition:

- 1 Laser cutting machine LS6090

- 1 Air compressor

- 1 Water pump

- 1 Mobile cabinet

- 1 Extraction turbine for external duct with flexible tube

- 1 Rdworks multi-seat software

- 1 User manual in French

Warranty information: all consumables, wear parts are not covered by the warranty. Non-compliant use or use of materials not recommended by Polytech is at your own risk and will result in the cancellation of the warranty.