White demineralization unit - Aquadem

This device ensures the distribution of very high-quality demineralized water. The water to be treated passes through a cylinder containing mixed-bed ion exchange resins. The resin retains almost all dissolved ions and therefore ensures the production of Type II water - Laboratory Quality. A mini-controller, equipped with a probe, allows for continuous monitoring of the water quality at the outlet of the cylinder. The device is delivered pre-assembled and can be connected directly to your water supply (no pump or electrical connection is required). __null__ The cylinder is made of regenerable resin. The regeneration and delivery of the resin are carried out by Veolia Aquadem through a standard exchange of the saturated cylinder with a new cylinder. Waste management is therefore non-existent. You will find the email address of your local agency in the file "Veolia - Customer Services by Region" visible in the "Documentation" tab. Estimated price in mainland France 2024 for the regeneration of a cylinder: - E100: €150 before tax - E200: €179 before tax - E300: €219 before tax - E500: €330 before tax - E600: €413 before tax - E1000: €539 before tax. __null__ Delivered pre-assembled, this device is to be connected directly to your water supply. Continuous pressure connection: no need to open/close the water supply for each use. (It is still recommended to shut off the water supply at the end of the day and during prolonged periods of non-use). No storage of produced water thanks to the stainless steel distribution gun that allows instant supply. The length of the spiral hose (5 meters) allows for a wide coverage in your laboratory. __null__ The Mini Controller allows for immediate reading of the water quality level produced, via the brightness of one of the three light indicators (green - yellow - red) every 20 seconds. Specially designed for qualitative control of stored or circulating fluids, this device is simple, reliable, robust, and modern. The low consumption digital technology used (coaxial probe with stainless steel 316L electrode) allows for a minimum autonomous operation of 2 years under normal use (via 2 supplied 1.5V AAA LR03 batteries, not installed). __null__ Depending on your needs, you can: - Increase production capacity: switch to a larger volume cylinder. - Improve the quality of the produced water: connect in a double cycle with two cylinders in series (by completing the previously ordered accessories). __null__ Each regenerated bottle is tested on a test bench and delivered with a security seal and a lot number (traceability). Upon request, we can provide you with the corresponding quality curve.

MONO Models: 

- 1 cylinder EXXX with regenerated resin - ready to use,

- 1 mini controller,

- 1 measuring probe,

- 1 overhead assembly,

- 1 stainless steel dispensing gun + fittings + 5 meters of Ø 8 mm spiral hose for connection to cylinder E100

- 1 connecting hose L. 1.6 meters + ¾ female fitting for connection to water inlet.

DUO Models: 

- 2 cylinders EXXX with regenerated resin - ready to use,

- 1 mini controller,

- 1 measuring probe,

- 1 overhead assembly,

- 1 stainless steel dispensing gun + fittings + 5 meters of Ø 8 mm spiral hose for connection to cylinder E100 (optional, ref. 707951)

- 1 connecting hose L. 1.6 meters + ¾ female fitting for connection to water inlet.

- 1 S4 overhead assembly

- 1 double connection kit

- 1 filtration and regulation panel PF210"