HCP Humidity Control System - MEMMERT

The HCP MEMMERT hygrometric chambers feature active regulation between 20% and 95% relative humidity (rh), as well as perfectly balanced temperature and humidity homogeneity throughout the inner chamber. MEMMERT offers the ideal equipment for your environmental tests, accelerated life duration tests, or stress tests, combining comfort, reliability, and safety. Basic Equipment - Door: Fully insulated stainless steel door with 2-point locking (door closure by compression) - Shelves: 2 electropolished stainless steel grids - Standard accessory: Water tank, including connecting hose (110-750: 2.5 liters, 1060-2200: 10 liters) - Factory calibration certificate: for +10 °C and +37 °C, 60% rh at +30 °C - Inner glass door - Warranty: 3 years Temperature - Useful temperature range: Without light: from 0 °C to +70 °C - Useful temperature range: With light: from +15 °C to +40 °C - Temperature display resolution: 0.1 °C - Temperature: 2 Pt100 DIN A class thermosensors in 4-wire technology with mutual monitoring and maintenance of operation at exactly the same temperature Regulation Technique - ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID microprocessor regulator with 2 high-resolution TFT color displays - Language configuration: German, English, French, Spanish, Polish, Czech, Hungarian - Adjustable parameters: Temperature (Celsius or Fahrenheit), relative humidity, program duration, time zones, daylight saving time - Clock: Digital timer with programmable stop time and duration setting from 1 minute to 99 days - SetpointWAIT function: Start the process only when the set temperature is reached - Calibration: Three selectable temperature and humidity values - Communication - Interface: Ethernet LAN, USB - State recording: Program cycle recording in case of power failure - Programming: Programming, management, and program download from an Ethernet interface or USB port using AtmoCONTROL software Safety - Thermal safety device: Selectable thermostat (protection class 3.3) or temperature limiter (protection class 2) on the screen - AutoSAFETY: Integrated additional thermal safety device with alarm for automatic setpoint monitoring, which automatically monitors the set value within a freely defined range, alarms in case of exceeding the upper/lower threshold, and cuts off the heating function in case of overheating or the cooling function in case of undercooling - Self-diagnostic system: For detecting anomalies in temperature and humidity control - Alarm: Visual and audible Heating Concept - Peltier: Eco-energetic Peltier cooling/heating system integrated into the rear wall (heat pump principle)