CO2 Incubator ICOMED - MEMMERT

The only difference between the ICO and ICOmed models is the CE medical certification for use in medical diagnostics. Standard component control CO2 control: Electronic and digitized regulation of CO2, in dual-beam NDIR procedure, self-diagnosis and audible anomaly message, barometric compensation of air pressure CO2 display range: 0 to 20% CO2 setting accuracy: 0.1% CO2 accuracy deviation: +/- 0.2% O2 display accuracy: 0.1% Humidity Humidity control (standard): Humidity limitation by Peltier element; ensures humidity limitation of the inner chamber to 93% rh +/- 2.5% with water-filled tray introduced into the inner chamber. Humidity display accuracy: 0.5% rh Temperature Usable temperature range: 5°C above ambient temperature to +50°C Built-in sterilization program: 60 minutes at 180°C (probes can remain in place) Displayable temperature range: +18 to +50°C Display resolution of setpoint and actual temperature values: 0.1°C Temperature: 2 Pt100 DIN A class four-wire thermosensors with mutual monitoring and maintenance of operation at exactly the same temperature Control technique ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID microprocessor controller with 2 high-resolution TFT color displays Language configuration: German, English, French, Spanish, Polish, Czech, Hungarian SetpointWAIT function: Process starts only when set temperature is reached Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, CO2, program duration, time zones, summer/winter time Communication Interface: Ethernet LAN, USB State recording: Program cycle recording in case of power failure Programming: Programming, management, and program download from Ethernet interface or USB port using AtmoCONTROL software Safety AutoSAFETY: Integrated additional thermal safety device with alarm for automatic monitoring of setpoint, automatically monitors setpoint value within a freely defined range, alarms for exceeding upper/lower thresholds, heating function cutoff in case of overheating or cooling function cutoff in case of undercooling Automatic diagnostic system: For detecting anomalies in temperature and CO2 control, as well as humidity regulation Alarm: Visual and audible Heating concept Full heating: Multifunctional full-surface heating system with additional heating of the door and rear wall to prevent condensation formation Warranty: 3 years