USB port for program transfer
User-ID access card
Manual or automatic adjustment of security settings
Data collection and program transfer with AtmoCONTROL software via Ethernet port
Safety thermostat TWB or TWW and ASF -
Temperature range -12° (0°C for model 55) to 60°C
Refrigerated incubator with compressor unit ICP - MEMMERT
Sku: Pr_243489
Memmert
The strong points
From
€8,650.95
€10,381.14
€0.00 eco-part
| SKU | Capacité | Price | Available | Amount Basket | ||
|---|---|---|---|---|---|---|
| 707540 | 108 L |
€8,650.95
€10,381.14
|
On order |
|
||
| 707529 | 256 L |
€8,839.95
€10,607.94
|
On order |
|
||
| 707530 | 449 L |
€11,427.15
€13,712.58
|
On order |
|
||
| 707531 | 749 L |
€13,422.15
€16,106.58
|
On order |
|
Temperature
Range of useful temperatures: At least 10 above ambient temperature up to 80
Display resolution of setpoint and actual temperature values: 0.1 °C
Temperature: 1 Pt100 DIN class A thermocouple with 4-wire technology
Control Technique
Language configuration: German, English, French, Spanish, Polish, Czech, Hungarian
ControlCOCKPIT: SingleDISPLAY. Adaptive multifunction digital PID microprocessor controller with high-resolution TFT color screen
Clock: Digital timer with shutdown time programming and adjustment from 1 minute to 99 days
SetpointWAIT function: Start of the process only when the setpoint temperature is reached
Calibration: Three selectable temperature values
Adjustable parameters: Temperature (Celsius or Fahrenheit), air circulation motor speed, air damper position, program duration, time zones, daylight saving time
Aeration
Air turbine: Electronic adjustment in 10% increments, silent operation
Fresh air supply: Electronic adjustment in 10% increments
Air outlet: Connection for air outlet with damper, electronic adjustment
Communication
State recording: Program cycle recording in case of power failure
Programming: Reading, managing, and organizing software state records from an Ethernet interface (time-limited trial version available for download). USB key with AtmoCONTROL software available on request as an accessory.
Safety
Thermal safety device: Adjustable electronic thermal safety device and mechanical temperature limiter TB with protection class 1 (DIN 12880) for heating cut-off at approximately 20 °C above the maximum device temperature
Self-diagnostic system: For anomaly detection
Environmental Conditions
Installation: A minimum gap of 15 cm should be provided between the wall and the rear panel of the device. The gap should not be less than 20 cm from the ceiling and 5 cm on the sides compared to the wall or another device
Installation altitude: max. 2000 m above sea level
Ambient temperature: +5 ºC to +40 ºC
Relative humidity: max. 80%, non-condensing
Overvoltage category: II
Pollution degree: 2
.
| Alimentation | Power cord with Schuko plug |
| Plage de régulation de la température | -12 to 60 °C |
| Stabilité | ±0,3 °C |
| Type d'affichage | Digital |
| Caractéristiques techniques |