Chemihood'plus filtering ventilation hood - EXACTA

Technical specifications of the filtering unit:

Construction in electro-galvanized steel 10/10 coated with gray epoxy paint RAL 7035

Axial fan (turbine)

Flow rate: 100/250 m3/h

Voltage/frequency: 220 volts/50 Hertz

IP44

Sound level 45db

Compliant with ISO 3744 standard

On/Off switch with a light indicating proper operation Hour meter for visual operation with LED and sound

Filter saturation indicator with visual LED and sound indicators: measures the air flow speed through the active carbon filter.

Retention capacity of CCl4 on the filter of 7000g (in compliance with the efficiency level defined by the AFNOR NFX 15-211 standard) resulting in a maximum rejection of 50% of the average exposure value of the product

Filter selection based on the handled products.

Sampling pump by colorimetric control optional

Technical specifications of the hoods:

Entirely built in "optical" methyl methacrylate of 8mm thickness, CHEMIHOOD PLUS hoods offer an optimal internal vision, bright and without any distortion.

7° inclined front panel - ergonomic position at the workstation

Front panel can be fully raised and locked to facilitate access to bulky instrumentation, chemicals, or cleaning operations.

Two ports for arm passage allowing easy manipulations with maximum safety.

Possibility to introduce electrical cables and fluids inside the enclosure through two cable glands located on the sides.

Stainless steel retention tray to collect liquids in case of accidental spills.

Possibility to add a worktop in enameled glass or HPL of 6 mm thickness.

Available in three widths: 600 mm, 900 mm, and 1200 mm.

Possibility to place the hood on a mobile stand with or without a shelf.

Equipped with a filtering ventilation unit compliant with the AFNOR NFX 15-211 standard (filter selection based on the nature of the stored products)