Labpur H153G+ Filtering Ventilation Hood - TRIONYX

STANDARD EQUIPMENT PROVIDED:

OPERCULES
Each hood is equipped with 4 opercules allowing easy introduction of your electrical or gas supply cables, for example.

TRANSPARENT WALLS
Our hoods come with robust transparent walls on all sides, providing you with a bright workspace. Convenient for demonstrations.

SAMPLING PORT
A sampling port, located on the front of the hood, allows you to quickly and reliably check the saturation of your active charcoal filter using the pump and reagent tubes.


TOUCH SCREEN INTERFACE / FILTER ALARM 5 (CLASS 1 AND 2) WITH:
This new generation of Labopur hoods features a new intuitive touch interface with complete functionalities to facilitate daily use of the hood, including:

•The filter alarm controller 5, thanks to an electronic circuit, measures the air passage speed at the front (0.4-0.6 m/s) and detects and alerts you to filter clogging or any air flow anomaly with an audible and visual signal in accordance with standard NF X 15-211.
•The automatic air flow regulator (0.4-0.6 m/s) analyzes the flow speed in real time and ensures that the hood operates under negative pressure, guaranteeing the containment of vapors in the work area and the passage of vapors through the filter.
•Hour counter (60 hours): an audible and visual signal prompts you to check the saturation of the active charcoal filter.


OPTIONAL EQUIPMENT:

LAMINATED WORKTOP
Made of high-density laminate, it offers excellent resistance to chemical aggression. A glass worktop is also available for use with acids.

GLASS WORKTOP
Made of laminated glass 2x3mm + 8mm opal PVB film for use with highly aggressive products such as acids.

LIGHTING
We offer the integration of LED lighting inside the hood arranged to not obstruct your visibility. IP65 - 10W - 4200K - 710lm

DRIP TRAY
Under each worktop, there is a drip tray fitted to the hood. In case of leakage or accidental spillage, the handled liquids are collected. To clean the tray, simply lift and remove the worktop and use an appropriate absorbent. This tray is provided with the worktop of your choice.

MANUAL PUMP AND REAGENT TUBES
Think about your health. Check the saturation of your active charcoal filter using a pump and reagent tubes (required for class 2 only). We can offer you a wide range of reagent tubes based on your products, consult us!


MANDATORY OPTIONAL EQUIPMENT (to be chosen based on your use):

CHEMICAL SENSOR
Automatic detector E-detect for active charcoal filter saturation (mandatory and only available for Class 1 Hoods): to be chosen from the following compounds: ammonia vapors, corrosive+organic vapors, formaldehyde vapors, or organic vapors.

ACTIVE CHARCOAL FILTERS AND HEPA H14 FILTERS
Your Labopur NFX15.211 hood must be equipped with one (Class 2) or two identical (Class 1) molecular active charcoal filters per filtration column. It can also be additionally equipped with a Hepa H14 filter. For use with Hepa filter only: choose a Class 2 hood.