Labpur H153Z+ Filtering Ventilation Hood - TRIONYX

STANDARD EQUIPMENT PROVIDED:

FLAPS
Each hood is equipped with 4 flaps allowing easy introduction of your electrical or gas supply cables for example.

TRANSPARENT WALLS
Our hoods are delivered with robust transparent walls on all sides, offering you a bright working space. Convenient for demonstrations.

SAMPLING OUTLET
A sampling outlet, located on the front of the hood, allows you to quickly and reliably check the saturation of your active charcoal filter using the pump and reagent tubes.


TOUCH SCREEN INTERFACE / FILTRATION ALARM 5 (CLASS 1 AND 2) INCLUDING:
This new generation of Labopur hoods features a new intuitive touch interface with complete functionalities to streamline the daily use of the hood, including:

•The filtralarm 5 controller, thanks to an electronic circuit, measures the air passage speed at the front (0.4-0.6 m/s) and detects and alerts you to filter clogging or any air flow anomalies with an audible and visual signal in accordance with standard NF X 15-211.
•The automatic air flow regulator (0.4-0.6 m/s) analyzes the flow speed in real time and verifies that the hood is working under negative pressure, ensuring the containment of vapors in the work area and the passage of vapors through the filter.
•Hour counter (60 hours): an audible and visual signal prompts you to check the saturation of the active charcoal filter.


OPTIONAL EQUIPMENT:

MELAMINE WORKTOP
Made of high-density melamine, it offers excellent resistance to chemical aggression. A glass worktop is also available for acid use.

GLASS WORKTOP
Made of laminated glass 2x3mm + opal PVB film 8mm for use with highly aggressive products such as acids.

LIGHTING
We offer to integrate LED lighting inside the hood arranged so as not to obstruct your visibility. IP65 - 10W - 4200K - 710lm

CONTAINMENT TRAY
Under each worktop, there is a containment tray fitted to the hood. In case of leakage or accidental spillage, the handled liquids are thus collected. To clean the tray, simply lift and remove the worktop and use an appropriate absorbent. This tray is provided with the worktop of your choice.

MANUAL PUMP AND REAGENT TUBES
Think about your health. Check the saturation of your active charcoal filter using a pump and reagent tubes (required for class 2 only). We can offer you a wide range of reagent tubes according to your products, contact us!


MANDATORY OPTIONAL EQUIPMENT (to be chosen according to your use):

CHEMICAL SENSOR
Automatic detector E-detect of active charcoal filter saturation (mandatory and only available for Class 1 Hoods): to be chosen from the following compounds: ammonia vapors, corrosive + organic vapors, formaldehyde vapors, or organic vapors.

ACTIVE CHARCOAL FILTERS AND HEPA H14 FILTERS
Your Labopur NFX15.211 hood must be equipped with one (class 2) or two identical (class 1) active charcoal molecular filters per filtration column. It can also be additionally equipped with a Hepa H14 filter. For use with Hepa filter only: choose a class 2 hood.