AQUADEM demineralization units - White Range

Sku: 603795
Aquadem
The strong points
  • High instantaneous flow

    Large production capacity

    Regenerable resin

    Zero water discharge

    Pre-assembled for quick setup

    dispensing gun"

€832.50 €999.00

This device ensures the distribution of very high quality demineralised water.

The water to be treated passes through a cylinder containing mixed bed ion exchange resins.

The resin retains almost all the dissolved ions and therefore ensures the production of type II - Laboratory Quality water.

A mini-controller, equipped with a probe, allows a permanent control of the quality of the water at the outlet of the cylinder.

The device is delivered pre-assembled and to be connected directly to your water supply (no pump or electrical connection is necessary).


Environmentally friendly :

The cylinder is made of a regenerable resin.

The regeneration and delivery of the resin is carried out by Veolia Aquadem via a standard exchange of the saturated cylinder with a new cylinder.

Waste management is therefore non-existent.

You will find the email address of your local agency in the file "Véolia - Customer services by region" visible in the "Documentation" tab.

Indicative price for metropolitan France 2021 for the regeneration of a cylinder:

- E100: €140 including tax

- E200: €170 incl. tax

- E300: €200 including tax.


Simple and Practical

Delivered pre-assembled, this device is to be connected directly to your water supply.

Connection under continuous pressure: no more need to open/close the water supply with each use. (However, it is recommended to turn off the water supply at the end of the day and during prolonged periods of non-use).

No storage of water produced thanks to the stainless steel dispensing gun which allows instantaneous supply.

The length of the spiral hose (5 meters) allows you to cover a large perimeter in your laboratory.


Reliable

The Mini Controller allows immediate reading of the quality level of the water produced, via the flashing of one of the three indicator lights (green - yellow - red) every 20 seconds.

Specially designed for the quality control of stored or circulating fluids, this device is simple, reliable, robust and modern.

The low-consumption digital technology used (coaxial probe with 316L stainless steel electrode) allows it autonomous operation for a minimum of 2 years in normal use (via 2 1.5 V AAA LR03 batteries supplied, not fitted).


Scalable

Depending on your needs, you can:

- Increase production capacity: switch to a larger volume cylinder.

- Increase the quality of the water produced: double cycle connection with two cylinders in series (by completing the accessories previously ordered).


Qualitative

Each regenerated bottle is checked on a test bench and delivered with a safety seal and a batch number (traceability). On request, we can provide you with the corresponding quality curve."

Pression 3
Masse 11 kg
Débit (l/h) 80
Configuration Mono
Caractéristiques techniques

Resin volume: 8 to 22 L

Total exchange capacity depending on feed water : 700 to 1900 L at 20°f, subject to dissolved CO2 level and stability of feed water quality

Instantaneous production rate: 80 to 250 L / H

Quality of the water produced:

- Resistivity: between 5 and 10 MO.cm

- Conductivity: between 0.2 and 0.1 µS/cm

Operating pressure: 3 bars

Cylinder dimensions (excluding top):

Ø: 205 to 254 mm

H.: 450 to 660 mm

Provide height 650 mm to facilitate maintenance

Mass : 11 to 25 kg (empty water)

Learn more about resin:

In a mixed bed, the H+ and OH- previously fixed on the matrices of the cationic and anionic resins during the regeneration phases, are exchanged with the cations (+) and anions (-) present in the water. The resins are then almost completely saturated and must be regenerated. These released H<sup>+</sup> and OH<sup>-</sup> ions instantly recombine to create new water molecules: H+ + OH- ? HOH ? H<sub><body>2< /body></sub>O"