Equipped with 2 rear 50mm diameter polypropylene wheels and front sabots.
The platform equipped with polypropylene bearings rotates around a tubular axis.
In working position, a brace locks into a clamp fixed under the platform.
In folded position, the clamp releases the brace, a locking clip ensures the platform remains in position.
In folded storage position, the depth increases by 95mm with each table added to the previous one.
The metal structure consists of:
- two supports each made up of two 30mm diameter round tube uprights, welded on a V-shaped base made of 40mm diameter round tube, as well as a tubular axis made of 30mm diameter round tube.
A 10mm diameter round steel wire brace articulates between the uprights.
- a 12x3mm flat iron guide.
- a spring locking clamp made of 2mm thick pressed sheet metal.
The platform is made of 19mm thick chipboard, laminated with a 0.8mm thick decorative laminate, counterbalanced by a 0.8mm thick white laminate, and the edges are protected by a 2mm thick ABS strip. Dimensions: 70 x 50 cm.
Color: Light gray frame RAL 7035-980 (other colors available upon request)
Dimensions: 700 x 500 x 760 mm
Delivered assembled.
