Bi-Eau Énergie is the essential <bold>eco-responsible</bold> alternative for all laboratory heating work (glass work, heating containers, sterilization of loop wires) and for all types of metal assembly (welding, brazing, heating in boilermaking, jewellery).
It replaces the Bunsen burners and torches traditionally used.
Versatile, it will become indispensable and will naturally find its place in your workspace.
The very high temperature of the hydrogen flame, over 3000°C, allows rapid heating or soldering.
It does not emit CO2. It is a "clean" and environmentally friendly flame unlike that produced by a more toxic fossil fuel. The risk of poisoning is therefore non-existent.
The Bi-Eau Énergie works with demineralised water.
The hydrogen used is fully cleaned, rinsed, distilled and then dried. This process guarantees the purity and quality of the hydrogen for safe use.
No combustion is generated. Your glassware or metal parts therefore remain clean.
Preset in the factory, no tedious adjustment is to be made.
No storage, hydrogen is generated on demand via the flow adjustment button: 4 possible levels.
Its use is therefore simple and intuitive.
Once plugged in and in the "ON" position, check the water level, set the desired flow rate and the Bi-Eau does the rest!
Compact and mobile, it moves easily thanks to its 4 multidirectional wheels, 2 of which have brakes.
Safe to use:
- 2 patents have been filed for the design of Bi-Eau Énergie: one for the generator and one for the control of hydrogen.
- The hydrogen outlet pressure is 0.9 bar maximum (a propane bottle is 7 bars).
- Circuit breaker fuse.
- Valve, fuse, pressure gauge and gas non-return.
The Bi-Eau Énergie is CE certified.
Economic :
- No more gas bills,
- No more need to take out specific insurance for the use of gas.
- Depending on your usage, around 4 liters of demineralised water may be enough for a week of work.
Performance:
- 60 seconds to weld two metal tubes.
- 40 seconds to braze two copper tubes.
- 1.50 mins. to weld two metal plates.
- 4.30 mins. to melt a rusty nut and screw.
- other examples with glassware elements.....
It is the only 100% hydrogen solution (without additives) on the market, capable of welding steel.
A project ? An advice ? A demonstration ?
Consult our technical assistance by phone on 0 825 563 563 or by email at support@jeulin.fr
| Alimentation | 230 V - 50 Hz |
|
Caractéristiques techniques
Food : level 1 setting: 2400 W - 11 A level 2 setting: 2800 W - 13 A level 3 adjustment: 3100 W - 14 A level 4 setting: 3500 W - 16 A Mains: 230 V - 50 Hz Fuse protection: 20A H.250V resettable circuit breaker Dimensions: L.51 x W.50 x H.50 cm. Mass : 56 kg. Fixed on wheels to facilitate movement of the device. |
