IPP+ refrigerated incubator - MEMMERT

The excellent regulation capacity, operation at an extremely low vibration level, and significant energy savings are all value-added features that perfectly illustrate the adaptation of Peltier technology. With this wide range of devices equipped with Peltier elements for heating and cooling, such as the Peltier-cooled incubator IPP, the Peltier-cooled storage incubator IPS, the constant climate chamber HPP, and the Peltier cooling device CDP115 for water baths, Memmert holds a leading position in this highly demanding technology market segment. **TwinDISPLAY Controller**: Historical displays, USB port for program transfer, User-ID access card, manual or automatic adjustment of safety setpoints, HeatBALANCE heating power adjustment. It can also collect data and transfer programs with AtmoCONTROL software via Ethernet port. **Temperature**: Useful temperature range: From 0 °C to +70 °C Temperature setpoint and actual temperature display resolution: 0.1 °C Temperature: 1 Pt100 DIN class A thermocouple in 4-wire technology **Control Technique**: Language settings: German, English, French, Spanish, Polish, Czech, Hungarian ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID microprocessor controller with high-resolution TFT color display. Clock: Digital timer with programmable stop time and duration setting from 1 minute to 99 days SetpointWAIT function: Process starts only when set temperature is reached. Calibration: Three selectable temperature values Adjustable parameters: Temperature (Celsius or Fahrenheit), program duration, time zones, daylight saving time **Ventilation**: Convection: Forced air circulation from a Peltier fan inside **Communication**: State recording: Program cycle recording in case of power outage Programming: Reading, managing, and organizing software state recordings from an Ethernet interface (time-limited trial version available for download). USB key with AtmoCONTROL software available on request as an accessory. **Safety**: Thermal safety device: Adjustable electronic thermal safety device and mechanical temperature limiter TB Self-diagnostic system: For anomaly detection **Heating Concept**: Peltier: Eco-energetic Peltier cooling/heating system integrated into the rear wall (heat pump principle). **Environmental Conditions**: Installation: Allow a minimum distance of 15 cm between the wall and the back panel of the device. The gap should not be less than 20 cm from the ceiling and 5 cm on the sides compared to the wall or another device. Ambient temperature: 16 ºC to 40 ºC Relative humidity: max. 70%, non-condensing Installation altitude: max. 2000 m above sea level Overvoltage category: II Pollution degree: 2 **Warranty**: 3 years