Forced convection incubator IF30+ - MEMMERT

Bacteriological incubators MEMMERT

Color display of temperature, time, fan speed, and air flap opening. SetpointWAIT function (start of countdown when setpoint is reached). TB safety thermostat.
Intuitive 'Touch, turn and go' control. Door can be opened with elbow or foot.

Equipment of the TWINDISPLAY model (double screens)

Temperature

Temperature up to 80°C
Temperature range: +5° for IN versions up to 80°C, stability +/- 0.3° at 37°C, homogeneity +/- 0.6°C at 37°C.
Useful temperature range: At least 10° above ambient temperature up to 80.

Display resolution of setpoint and actual temperature values: 0.1 °C
Temperature: 2 Pt100 class A thermosensors in 4-wire technology with mutual monitoring and maintenance of operation at exactly the same temperature.

Regulation Technique

ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID microprocessor controller with 2 high-resolution color TFT screens.

Language configuration: German, English, French, Spanish, Polish, Czech, Hungarian.
Clock: Digital timer with stop time programming and setting from 1 minute to 99 days.
HeatBALANCE function: Adaptation of thermal power distribution between upper and lower heating elements in a range between -50% and +50%.
SetpointWAIT function: Start of the process only when the setpoint temperature is reached.
Calibration: Three selectable temperature values.

Adjustable parameters: Temperature (Celsius or Fahrenheit), air circulation motor speed, air flap position, program duration, time zones, summer/winter time.
Sterilization: Fixed sterilization program (4 h/160 °C) for sterilizing the internal chamber but not the loading element.

Aeration

Air turbine: Electronic adjustment in 10% increments, quiet, segment-specific.
Fresh air supply: Electronic adjustment in 10% increments, segment-specific.
Air outlet: Connection for air outlet with flap, electronic adjustment.

Ambient temperature: +5 ºC to +40 ºC
Humidity h.r.: max. 80%, non-condensing

Communication

State recording: Program cycle recording in case of power failure
Programming: Programming, management, and downloading of programs from an Ethernet interface or USB port using AtmoCONTROL software.

Safety

Thermal safety device: Mechanical temperature limiter TB with protection class 1 (DIN 12880) for heating cut-off at about 20 °C above the device's maximum temperature.
Thermal safety device: Thermostat (protection class 3.1) or temperature limiter (protection class 2) selectable on the screen.

AutoSAFETY: Integrated additional thermal safety device with alarm for automatic monitoring of the setpoint, which automatically monitors the setpoint value over a freely defined range, alarms in case of exceeding the upper/lower threshold, heating cut-off in case of overtemperature.

Self-diagnostic system: For anomaly detection
Alarm: Visual and audible

Basic Equipment

Shelves: See product sheets.
Standard content: Factory calibration certificate at +37 °C included
Door: See product sheets.