Forced convection incubator IF30 - MEMMERT

Bacteriological incubators MEMMERT

Color display of temperature, time, fan speed, and air flap opening. SetpointWAIT function (start of countdown at setpoint reached). Safety thermostat TB.
Intuitive 'Touch, turn and go' operation. Door can be opened with elbow or foot.

Equipment of the SingleDISPLAY model

Temperature

Temperature up to 80°C
Temperature range: +5° for versions IN up to 80°C, stability +/- 0.3° at 37°C, homogeneity +/- 0.6°C at 37°C.
Useful temperature range: At least 10° above ambient temperature up to 80.

Display resolution of setpoint temperature and actual temperature values: 0.1 °C
Temperature: 2 Pt100 class A thermosensors in 4-wire technology with mutual monitoring and maintenance of operation at exactly the same temperature.

Regulation Technique

ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID microprocessor regulator with 2 high-resolution TFT color screens.

Language configuration: German, English, French, Spanish, Polish, Czech, Hungarian.
Clock: Digital timer with stop time programming and duration setting from 1 minute to 99 days.
HeatBALANCE function: Adaptation of thermal power distribution between upper and lower heating elements in a range from -50% to +50%.
SetpointWAIT function: Start of the process only when the setpoint temperature is reached.
Calibration: Three selectable temperature values.

Adjustable parameters: Temperature (Celsius or Fahrenheit), air stirring motor speed, air flap position, program durations, time zones, daylight saving time/winter time.
Sterilization: Fixed sterilization program (4 h/160 °C) for sterilizing the internal chamber but not the load.

Aeration

Air turbine: Electronic adjustment in 10% increments, silent, segment-specific.
Fresh air supply: Electronic adjustment in 10% increments, segment-specific.
Air outlet: Connection for air outlet with flap, electronic adjustment.

Ambient temperature: +5 ºC to +40 ºC
Relative humidity h.r.: max. 80%, non-condensing

Communication

State recording: Program cycle recording in case of power failure
Programming: Programming, management, and program download from an Ethernet interface or USB port using AtmoCONTROL software.

Safety

Thermal safety device: Mechanical temperature limiter TB, protection class 1 (DIN 12880) for heating cut-off at approximately 20 °C above the device's maximum temperature.
Thermal safety device: Thermostat (protection class 3.1) or temperature limiter (protection class 2) selectable on screen.

AutoSAFETY: Integrated additional thermal safety device with alarm for automatic monitoring of setpoint, which automatically monitors the set value within a freely defined range, alarms in case of exceeding upper/lower threshold, heating cut-off in case of overheating.

Self-diagnostic system: For anomaly detection
Alarm: Visual and audible

Basic Equipment

Shelves: 2 stainless steel grid(s), electropolished
Standard content: Factory calibration certificate at +37 °C included
Door: Inner glass doors

.