6-tooth crosscutting blade, 1 edge
| SKU | Largeur de fente | Price | Available | Amount Basket | ||
|---|---|---|---|---|---|---|
| 703948 | 1 mm |
€284.00
€340.80
|
On order |
|
||
| 703949 | 2 mm |
€284.00
€340.80
|
On order |
|
||
| 703950 | 3 mm |
€395.00
€474.00
|
On order |
|
Crosshatch Kit
This method is used for determining the adhesion of one or more layers of paint with parallel grooves on a substrate, usually a metal panel. Cross-cut test kits are available with a cutting edge. The Cross Cut blades are made of hardened steel alloy and are designed to maintain a sharp edge abrasion resistance to reduce the frequency of blade replacement.
ASTM D3359 method requires 11 cut lines for a 1 mm cutter:
1 mm cutter for films up to 50 µm (2 mils) thick
2 mm cutter for films 50-125 µm (2 - 5 mils) thick
ISO standards prescribe that the number of cuts should be 6, and that the cut in each direction should be based on the film thickness and the type of coating used, as illustrated below:
0 - 60 µm 1 mm spacing for hard substrates (metal)
0 - 60 µm 2 mm spacing for flexible substrates (plastic)
61 - 120 µm 2 mm spacing for hard or soft substrates
121 - 250 µm 3 mm spacing for hard or soft substrates