Maximum distillation capacity: 4 L/h of simple distilled water
pH: 5.0 to 6.5
Conductivity: 3.0 to 4.0 µS/cm-1
Resistivity: 0.25 to 0.3 mΩ/cm
Temperature: 25 to 35 °C
Water supply: 1 L/min
Power supply: 220 V, 50-60 Hz, single phase
Power consumption: 3 kW
Dimensions (W x D x H): 500 x 150 x 450 mm
Protection rating: IP 31
Device provided without electrical plug.
Connection to the power supply must be done by the user.
The supply of the water supply hose (between the water inlet of your laboratory and the distiller) is not provided by the Stuart brand manufacturer.
Jeulin offers 2 different qualities in Ø int. 8 mm: English leaf tube Ref. 703 067 or PVC tube Ref. 723139.
Find them in the 'Related Products and Consumables' tab.
The heating element is excluded from the 3-year warranty.
The latter is guaranteed for 1 year or 1,000 hours of use, subject to proper maintenance.
Merit W4000 - STUART Distiller
Sku: 701165
Stuart
The strong points
€1,509.05
€1,810.86
The Merit is an ideal choice for laboratories with a limited budget, but who do not want to compromise on quality.
It combines economy and high performance and offers features that other comparable stills cannot rival.
The unit includes a funnel for adding acid and a stopcock on the drain. This allows for easy descaling without having to disassemble the glassware. The exclusive design of the condenser ensures that distilled water droplets remain in contact with the cooling coil for as long as possible. This improves efficiency by producing cold distilled water and preheating the feed water for the still. All water connections are threaded: hoses can be easily connected and disconnected without the risk of breakage.
It offers great safety with two independent thermostats to prevent overheating in case of water supply interruption.
The stand is pre-drilled for easy wall mounting.
REMINDER: After a certain period of operation, scale may build up on the heating element and inside the boiler. To ensure the proper functioning of the unit, scale must be regularly removed.
The time interval between 2 cleanings depends on the hardness of the feed water. In regions where the water is very hard, it may be necessary to clean the distiller every week. In regions where the water is softer, several weeks may pass between 2 cleaning operations.
Significant scaling will reduce the quality of the distilled water and the lifespan of the heating element.
The appearance of white deposits on the heating element and/or the boiler is a sign that descaling is necessary.
Scale dissolves perfectly in a solution of 10% diluted formic acid.
Some household descaling solutions can also be used.
| Débit (l/h) | 4 |
| Caractéristiques techniques |
- Replenishment in progress
