Labpur H153D+ Filtering Ventilation Hood - TRIONYX

STANDARD EQUIPMENT PROVIDED:

HOOD COVERS
Each hood is equipped with 4 hood covers allowing easy introduction of your electrical or gas supply cables, for example.

TRANSPARENT WALLS
Our hoods are delivered with sturdy transparent walls on all sides, providing you with a bright working space. Convenient for demonstrations.

SAMPLING PORT
A sampling port, located on the front of the hood, allows you to quickly and reliably monitor the saturation of your active carbon filter using the pump and reagent tubes.


TOUCH SCREEN INTERFACE / FILTER ALARM 5 (CLASS 1 AND 2) WITH:
This new generation of Labopur hoods features a new intuitive touch interface with comprehensive functionalities to streamline the daily use of the hood, including:

• The filter alarm 5 controller, thanks to an electronic circuit, measures the air passage speed at the front (0.4-0.6 m/s) and detects and alerts you to filter clogging or any airflow anomaly with an audible and visual signal in accordance with standard NF X 15-211.
• The automatic airflow regulator (0.4-0.6 m/s) analyzes the flow speed in real time and ensures that the hood operates under negative pressure, guaranteeing the containment of vapors in the working chamber and the passage of vapors through the filter.
• Hour counter (60 hours): an audible and visual signal prompts you to check the saturation of the active carbon filter.


OPTIONAL EQUIPMENT:

MELAMINE WORKTOP
Made of high-density melamine, it offers excellent resistance to chemical aggression. A glass worktop is also available for acid use.

GLASS WORKTOP
Made of laminated glass 2x3mm + 8mm opal PVB film for the use of highly aggressive products such as acids.

LIGHTING
We offer to integrate LED lighting inside the chamber arranged so as not to obstruct your visibility. IP65 - 10W - 4200K - 710lm

CONTAINMENT TRAY
Under each worktop, there is a containment tray fitted to the hood. In case of leakage or accidental spillage, the handled liquids are collected. To clean the tray, simply lift and remove the worktop and use an appropriate absorbent. This tray is provided with the worktop of your choice.

MANUAL PUMP AND REAGENT TUBES
Think about your health. Check the saturation of your active carbon filter using a pump and reagent tubes (required for class 2 only). We can offer you a wide range of reagent tubes depending on your products, contact us!


MANDATORY OPTIONAL EQUIPMENT (to be chosen based on your use):

CHEMICAL SENSOR
Automatic detector E-detect for active carbon filter saturation (mandatory and only available for Class 1 Hoods): to be chosen from the following compounds: ammonia vapors, corrosive+organic vapors, formaldehyde vapors, or organic vapors.

ACTIVE CARBON FILTERS AND HEPA H14 FILTERS
Your Labopur NFX15.211 hood must be equipped with one (Class 2) or two identical (Class 1) active carbon molecular filters per filtration column. It can also be additionally equipped with a Hepa H14 filter. For use with Hepa filter only: choose a Class 2 hood.