Trionyx Labpur®_H091D filtering ventilation hood

Optimal user protection: - Hoods approved to standard NF X 15-211 - MAY 2009 by independent French laboratories and inspection bodies. - Containment of vapors and powders in the handling chamber, then elimination of these as they pass through the molecular filter or the HEPA filter. - Front-mounted sampling socket allowing a fast and reliable control of the saturation of the filter. - Light indicator on the front ensuring the user the correct operation of the ventilation / filtration system of the hood. - Silent electric fans meeting CE specifications. - Control window located on the front immediately indicating whether the filter is present and well suited to the work. - Removable retention basin under the worktop allowing liquids to be recovered in the event of accidental spills. Time and energy savings: - Hoods delivered ready to use (no assembly), to be connected only to the electrical network. - No connection or evacuation required, solution without civil engineering (if the hood is fitted with a filter). - It is not necessary to heat or cool the air entering the room. Comfort of use: - Transparent walls on all sides providing optimal illumination of the worktop and immediate visualization of the products handled. - Ergonomic hand passages allow safe and easy handling in the enclosure. - Slides allowing the introduction of the power supply cables of the devices. - Very low acoustic level of the fans, thus allowing increased concentration for the work. - Very easy to replace the activated carbon filter, a few minutes are enough. Equipment that must be ordered with your hood For liquid use only : filter ref. 792 574 (organic vapors) or ref. 792,575 (corrosive vapors). For other vapors predominantly formaldehyde or ammonia (consult us). For powder use only : ref. 791 998 (Hepa filter) + ref. 791 997 (Support) + ref. 791 999 (ventilation element CAR200). For powder + liquid use : ref. 791 998 + Ref. 791 997 + ref. 792 574 or Ref. 792 575. Additional accessories (to choose below): - retention tank + melamine worktop - retention tank + laminated glass worktop. (1) For the hood ref. 792 970, there are 2 filtration modules / Motor therefore it is necessary to multiply by 2 the quantities of consumables and accessories to order above

STANDARD EQUIPMENT: - 4 covers for supply and fluid passages - Air flow controller - Time meter - Sampling - Transparent rear wall