Mini air recirculation hood Labopur H70 - TRIONYX

Absorption capacity of activated carbon filters and filtration system tested and approved to standard NF X 15-211 - May 2009. Electric fan compliant with CE specifications. Easily placed on a workbench or bench. Confinement of vapors in the handling enclosure and their elimination when passing through the activated carbon filter. Indicator light for the ventilation system operation. Control window to check the presence of the appropriate filter according to your needs. High-efficiency specialized activated carbon filter treated according to the stored products, tested to standard NF X 15-211 - May 2009. Anti-dust filter, 92% efficiency for particles <3 microns. Easy replacement of the activated carbon cell. Hour meter constantly indicating the total duration of hood use. After programming, every 60 hours, an audible signal indicates the need to check the saturation of the activated carbon filter. Integrated retention tank allowing the recovery of liquids in case of accidental spillage. No connection or evacuation required, no civil engineering needed (if used with an activated carbon filter). Hood delivered ready for use (no assembly required), simply connect to the electrical network and position the filter in place. Adjustable feet for leveling. Options: Activated carbon filter: The mini-hood is delivered without an activated carbon filter. You must select one based on the type of products you handle. Element for use without activated carbon filter. Filter obsolescence checks using REAGENT TUBES: - Control port on the side of the cabinet. - Port allowing the introduction of specialized reagent tubes. - Use of a manual pump. - Detection of the efficiency or saturation of the activated carbon filter by reading the tubes.