Water trunk in "Assistent"

Presentation

Most reliable water pump for your vacuum filtration, delicate distillation or sublimation, liquid aspiration, and desiccator evacuation tasks. **Please note**: Some chemicals or their vapors can damage the device. Therefore, it is important to consider the chemical resistance of FKM, PP, and PTFE. Maximum operating temperature: 80 °C. Water pressure should be between 3 and 6 bar.

- Water trunk body with integrated non-return valve, - Water inlet pipe with R 3/4" connection nut, - R 1/2" reduction fitting, - Water inlet pipe with 10-12 mm outer diameter olive, - 6-10 mm outer diameter vacuum olive with GL14 threaded connector, - Seals.

Technical characteristics

Ø extérieur	6 mm
Ø intérieur	6 mm

Caractéristiques techniques

Engine agent: water.
Connection to water pipe: by R 3/4', reduction fittings R 1/2' or olive connector Ø ext.10-12 mm (for flexible hose).
Vacuum connection: olive Ø ext. 6-10 mm (for flexible hose) + threaded connector GL14.
Device length: approx. 220 mm with a R 3/4' fitting.
Weight: approx. 33 gr with a R 3/4' fitting.
Materials:
- flat seals: nitrile rubber
- O-rings: FKM
- valve disc: FKM
- sealing ring and flat gaskets: PTFE
- all other parts: PP.

Delivered with manufacturer's instructions.

Water pump in polypropylene "Assistent"