Humidity-controlled incubator constant climate series HPPeco MEMMERT

Sku: 708113
Memmert
The strong points
  • Temperature range from 0 to +70°C

  • Controlled humidity in compliance with ICH (Q1A) 10 to 90%RH

  • Heating and cooling using Peltier technology

€11,187.74 €13,425.29
- +
On order

Humidity

Active humidification and dehumidification adjustment from 10 to 90% relative humidity with digital display of the relative air humidity; 0.1% display resolution, 0.5% adjustment accuracy

Moisture supply from distilled water from an external reservoir via a self-priming pump

Humidification from a hot steam generator

Dehumidification from a Peltier technology cold trap

Humidity display accuracy 0.5% rh



Temperature

Temperature range: without light, with humidity: +5 to +70 °C
Temperature range: with light, with humidity: +5 to +70 °C
Temperature range: with light, without humidity: 0 to +70 °C


Deviation from ambient temperature +/- 0.5 up to 2 K
Temperature: 2 DIN A class Pt100 temperature probes in 4-wire technology with mutual monitoring and maintenance of operation at exactly the same temperature
Display: Digital determination of the setpoint values (resolution of 0.1°C to 99.9°C, 0.5°C from 100°C) and indication by light-emitting diode of the actual temperature value (resolution of 0.1°C)

Control technology

ControlCOCKPIT TwinDISPLAY. Adaptive multi-function microprocessor digital PID controller with 2 high-resolution TFT color displays
Language Setup German, English, French, Spanish, Polish, Czech, Hungarian
Adjustable parameters Temperature (Celsius or Fahrenheit), relative humidity, program duration, time zones, summer/winter times
Clock Digital timer with programmable stop time and adjustable duration from 1 minute to 99 days
SetpointWAIT function Start of the process only when the set temperature is reached
Calibration Three temperature and humidity values to choose from

Communication

Interface LAN Ethernet, USB
Registration of states Saving the program cycle in the event of a power failure
Programming Program, manage and download programs from Ethernet interface or USB port using AtmoCONTROL software


Security

Thermal safety device Thermostat (protection class 3.3) or temperature limiter (protection class 2) selectable on display
AutoSAFETY Additional built-in thermal safety device with alarm for automatic setpoint tracking, which automatically monitors the setpoint over a freely defined range, alarm if the upper/lower threshold is exceeded, cut-off of the heating function in the event of overtemperature or the cooling function in the event of undertemperature
Self-diagnosis system For detecting anomalies in temperature and humidity control
Alarm Visual and sound




Heating concept

Peltier Energy-efficient Peltier cooling/heating system integrated in the rear wall (heat pump principle)



Basic equipment

Standard factory calibration certificate +25°C / 60% rh, +40°C / 75% rh
Door Fully insulated stainless steel door with 2-point locking (compression door closure)
Door Interior glass door
Shelves 2 stainless steel grid(s), electropolished
standard accessory Water tank including connection hose


Electrical data

Voltage/electrical load 230V, 50/60Hz
about 420W
Voltage/electrical load 115V, 50/60Hz
about 420W


Packaging/shipping data

Transportation Information The devices must be transported in an upright position!
Common Customs Tariff 8419 8998
Native country Germany
WEEE registration number DE 66812464
Dimensions approx., box included Dimensions with packaging (W x H x D): 830 x 1050 x 800 mm
Net weight approximate: 64 kg
Gross weight in box

Alimentation 230 V, 50/60 Hz
Nombre max de clayettes 5
Nombre de clayettes livrées 2
Dimensions intérieures (L x H x P) 560 x 480 x 400 mm
Dimensions extérieures (L x H x P) 745 x 864 x 555 mm
Plage de régulation de la température 0 to 70°C (without humidity) - +5 to +70°C (with humidity)
Capacité 108 L
Type de portes Portes battantes
Puissance 420 W
Masse 64 kg
Stabilité ±1 °C
Chambre et clayettes Inox
Type d'affichage Ecran numérique
Garantie 2 ans