Benchtop Conductivity Meter OCD218 - ORIGALYS

OrigaLys was founded by four R&D engineers from Radiometer®. Drawing on their experience, OrigaLys now offers you the OrigaMeter range Conductimeter: OCD218. This conductimeter features an easy-to-use interface and ideal characteristics for teaching purposes. Durable and with a 5-year warranty (excluding consumables), it can be integrated into an existing set of conductimeters because its interface is compatible with those of older Radiometer® conductimeters. The instructions are simple and in French on a large display. Indeed, the latest calibration parameters are stored in the instrument and can be exported to a .txt file via USB transfer. The conductimeter is compatible with almost all ExAO systems (including Regressi) thanks to its outputs (digital and analog). The measured data can be exported and/or viewed in real time on the display. For data transfer, three possibilities: - Real-time data retrieval in Regressi is possible via an RS232 connection. It is then possible to analyze the results on Regressi or very easily copy and paste the data to Open Office. For computers without a native COM port, a USB to RS232 adapter (ref. 471 093) is required. - Analog output. Two measurement modes are available to facilitate the operator's work: manual mode, which allows continuous reading of conductivity displaying the stability indicator, or automatic mode where the result is frozen when the signal is stabilized (100% stability). - USB port.