Complete Stirling engine kit EXAO

Sku: 486040

Jeulin

The strong points

Comes with the PV Stirling sensor and Foxy console to obtain the Clapeyron diagram
Free Atelier Scientifique SUP software
Area under the curve tool (net exchanged work): exclusive to Jeulin in ExAO
Practical example of an easy-to-implement diathermic machine
Real-time cycle plotting
Functions as an electricity generator and refrigeration machine

Find out more

€2,495.83 €2,995.00 Instead of €3,702.50

-19%

Qty

- +

Replenishment in progress

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Presentation

Stirling engine practical work in ExAO:

The objective of this practical work is to highlight the real Stirling cycle in order to compare it to the theoretical cycle. Pressure, volume, and temperature are automatically acquired thanks to the provided Foxy interface.

Pressure is measured in real time using a pressure sensor connected to an orifice on the working piston cylinder. Volume is measured using a Hall effect sensor placed on the flywheel, and with a specific Stirling PV sensor developed by Jeulin.

The device allows for plotting the Stirling cycle on Clapeyron coordinates (pV diagram), thus enabling qualitative and quantitative analysis of the cycle.

Jeulin Exclusive:

After obtaining the Clapeyron diagram in the graphic tab of the provided Advanced Scientific Workshop software ref. 000131, it is possible, thanks to the integrated processing tools in the software, to easily determine the area under the curve (Integral) to obtain the value of the net work exchanged during a cycle.

Temperature can also be measured at the cold source and hot source directly on the cylinder. All these measurements are carried out with high acquisition speed and high reproducibility over time.

1 Stirling engine ref 204081

1 Foxy 2 console ref 485000

1 Stirling PV sensor ref 482108

1 Higher Education Scientific Workshop Software ref 000131 (complimentary)

Technical characteristics

Thématique TP

Énergie

Caractéristiques techniques

- Stirling engine power: 1.5 W - Idle speed: 1,000 rpm - Flywheel: Ø 140 mm - Working piston: Ø 25 mm - Working piston stroke: 24 mm - Gas volume: 32 cm³ - 44 cm³ - Motor/generator unit: max. 12 V DC - Pulley: two-stage (Ø 30 mm, Ø 19 mm) - Dimensions: 300 × 220 × 160 mm³ - Mass: 1.6 kg PV sensor characteristics: Pressure: Measurement range [0 to 7000 hPa] Resolution: 0.2hPa Angle: Measurement range [0 to 360 °] Resolution: 0.1° Volume: Measurement range [32 to 44 cm3] Resolution: 20 µm3

Documentation