Laser cutting 300 x 600 mm 60W LS3060

Robustness and versatility.
Practical and functional with wheel supports, you can engrave and cut your materials in a maximum format of 300 x 600 mm, up to 10 mm thick. (For acrylic materials: PMMA,...)
60 W laser power.

Operation
CO2 laser cuts are gas lasers whose tube, cooled by water, is made up of an electrically excited gas mixture of carbon dioxide.
During cutting or engraving, it is important to constantly cool the laser tube (A basic solution is provided in all our machines; however, we recommend using a regulated water cooler) and evacuate all fumes. (Either through an external duct if the establishment is equipped, or through a standalone extractor equipped with filters)

Usage and materials
Of high quality with precision, CO2 laser cuts are suitable for cutting or engraving many materials and most non-chlorinated plastics.

- Cutting / engraving:
Wood, wood veneer, cardboard, PE foam, ABS, acrylic, paper, textiles, leather, PMMA,...
- Engraving only:
Glass, stone, metal (with the addition of ceramic spray)

NEVER cut or engrave a material containing PVC or vinyl; a corrosive agent (Chlorine) will destroy your machine. If in doubt, you should consult the COSHH / health and safety data sheet for the product being processed and, if necessary, contact the manufacturer or supplier for additional advice.
The use of materials not recommended by polytech is at your own risk and will void the warranty.

Safe and easy to use
No chips, 'clean' cutting and engraving.
Fast execution.
All our machines comply with CE standards.
Interlocked cover.
Key opening.
Emergency stop.
French signage.
Key-operated on/off switch.

Composition:

- 1 LS3060 laser cutter

- 1 Air compressor

- 1 Water pump

- 1 Support on wheels

- 1 Extraction turbine for external duct with flexible tube

- 1 LaserCut software

- 1 User manual in French

Warranty information: any consumable, wear part is not covered by warranty. Non-compliant use or the use of materials not recommended by Polytech is at your own risk and will result in warranty cancellation.