3Dlac hairspray spray

Spray
This spray is applied to flat print beds to ensure the adhesion of your 3D prints and prevent any detachment.
Volume of 100 ml.

Usage Tips
- Spray evenly on the bed with just a few bursts. (Light and thin mist)
- The spray should be dry to the touch when the printing begins.
- After printing, the 3D piece can be removed using a spatula or by running the bed under cold water.
- Clean the print bed with cold water or using a glass cleaner available as an accessory.
- We recommend cleaning the bed and applying spray lacquer with each print.