Peaktech P2710 - Differential Circuit Breaker Tester
The PeakTech 2710 is a residual current tester, which is used to determine the tripping currents and tripping times of residual current circuit breakers, which are used in every new building according to current building regulations. Residual current circuit breakers are used for personal protection and cut off a circuit when a residual current is detected flowing through the protective earth (PE). RCD testers allow a fault current to pass through and thus determine at what fault current the RCD trips. The tripping time is also measured. These two parameters, tripping current and tripping time, are the safety parameters of an RCD. The different test currents and selectable features that can be set with this device make the PeakTech 2710 the ideal companion for every electrician.
Delivered with:
- Power cord/test cable
- Case
- Batteries
| Courant | 1 A |
|
Caractéristiques techniques
- Differential circuit breaker: standard (N), selective (S)
- Test current: 10 mA, 30 mA, 100 mA, 500 mA, 1000 mA
- Display: LCD
- CAT III 600 V
|
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
- On order
-
On order
-
On order
