Aaronia PBS1 - Near Field Probe Set DC up to 9GHz

Set of high-speed passive probes with a very wide frequency range (up to 9 GHz). High accuracy. Integrated tripod connection for perfect orientation.

The Aaronia CEM probe set that can be used with every spectrum analyzer, oscilloscope, or measuring receiver. It allows for easy localization and measurement of interference sources from DC (1Hz) to 9 GHz in electronic construction modules as well as the execution and monitoring of various EMC measurements.

All probes are equipped with a shielding layer that ensures precise measurements on oscillators and power supplies. Ideal for localizing interference sources that must be performed in accordance with standard EN 55011, EN55022, or EN50371 (Class A or B) during an assessment. Monitoring of the corresponding shielding measurements is also possible. Costly and time-consuming laboratory measurements (e.g. for reevaluation after circuit revision) can thus be avoided.

Each probe set undergoes rigorous testing in our laboratories before shipment. It is covered with a high-quality shielding layer that protects it against mechanical damage and environmental influences. It is also equipped with a tripod as well as an SMB connection.

- Suitable for every spectrum analyzer or measuring receiver

- Model: Passive H and E-field probes

- Frequency range: DC (1Hz) up to 9GHz

- Nominal impedance: 50 Ohm

- Gain: depends on the probe (see datasheet)

- Antenna factor: depends on the probe (see datasheet)

- HF connection: SMB (m) or SMA via adapter

- Tripod connection: 1/4"

- Warranty: 10 years