Features:
Screen: TFT 8.9 cm / 3.5 '; 320 x 240 pixels
Interface: USB, Bluetooth, SD card
Test standards: VDE 0100/0413, EN 61557-6, EN 61008, EN 61009, and IEC 60364
Measurement ranges:
Functions: RCD-Test, Loop / Pfc, V, Low Ohm, RE, Isolation
L-PE: 0.23 Ω ~ 999 Ω; +/- 5% + 6 dgt.
L-N: 0.23 Ω ~ 999 Ω; +/- 4% + 4 dgt.
RCD current multiplier: x ½; x 1; x 2; x 5; +/- 1% + 1 ms.
DDR current: 10 mA, 30 mA, 100 mA, 300 mA, 650 mA, 1 A
Differential circuit breaker tripping time (max.): ½ I∆N: 1999 mS; I∆N: 500 mS; 2xI∆N: 150 mS; 5xI∆N: 40 mS
Voltage measurement: 80 ~ 500 V AC / DC; +/- 2% + 2 dgt.
Frequency: 45 ~ 65 Hz; +/- 2 Hz
Insulation test: 0.125 Ω ~ 1000 MΩ at 125 V / 250 V / 500 V / 1000 V; +/- 3% + 2 dgt.
Low test: ohms 0.000 Ω ~ 2000 Ω; 0.001 Ω; +/- 1.5% + 3 dgt.
Earth resistance: 0.00 Ω ~ 2000 Ω; 0.001 Ω; +/- 2% + 30 dgt.
General specifications:
Safety: CAT III 600 V, IP65, SK II / Double insulation, TÃœV / GS
Operating voltage: 8 x 1.2 V Ni-MH Akku / 8 x 1.2 V Ni-MH rechargeable battery
Battery charger: Adapter 110-240 V AC, 50/60 Hz / 12 V DC
Dimensions: (WxHxD) 240 x 105 x 145 mm
Weight: 1560 g
EAN-13: 4250569403002
Peaktech P2755 - Installation Safety Tester
Sku: 297119
PeakTech
The strong points
€799.90
€959.88
This innovative combined measuring device for testing electrical installations according to official regulations impresses with its technical performance in the high-end sector. All important safety tests such as FI, voltage, loop, low resistance, earth resistance, and insulation tests for electronic controls and new installations can be safely performed by the electrician via the 3.5-inch TFT color display. Of course, the device comes with a wide range of accessories, such as all necessary test leads, adapters, rods, and the software CD required for the PC. The device can be charged with a power adapter or via a car adapter. In daily use, this high-quality device is protected against dust and water jets from all directions by its IP 65 protection class. • 3.5-inch TFT color display • For measurements according to DIN VDE 0100/0413, EN 61557-6, EN 61008, EN 61009, and IEC 60364 • Bluetooth interface for data transfer to a smartphone • Internal memory and SD card for data • Test standards: EN 61557-2, EN 61557-3, EN 61557-4, EN 61557-5, EN 61557-6, EN 61557-7 • Safety standards: EN 61010-1; CAT III 600 V, IP 65, TÜV/GS
Delivered with:
- Protective case
- Carrying strap
- Test leads
- Test probes
- Insulation probe
- Universal charging adapter
- Earth spikes
| Caractéristiques techniques |
Related Products
-
On order
- On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
-
On order
- On order
-
Replenishment in progress
-
On order
-
On order
