Tektronix TCP0020 - 20A AC/DC Current Probe
-
Current rating 20A RMS max
-
Impulse current rating 100A peak
-
DC coupling only
The TCP0020 is a high-performance, easy-to-use AC/DC current probe, designed to be used with a variety of oscilloscopes.
It is designed for direct connection to oscilloscopes, powered directly by oscilloscopes with the TekVPI probe interface. This current probe offers accurate AC/DC current measurements, a DC bandwidth up to 50MHz, a 5mm (0.2") jaw diameter, accurately measures current levels as low as 10mA per division, the split-core design allows for easy circuit connection, low noise and DC drift, and high precision with typically less than 1% DC gain error, which is important to meet today's challenging current measurement needs.
It is used in semiconductor devices, power supplies, inverters/power converters, electronic ballasts, mobile communications, motor drives, and transportation systems.
Comes with:
- Instruction manual
- 6-inch probe ground wire
- Nylon carrying case
Courant max AC (A) | 20 A |
Type de courant | AC/DC |
Caractéristiques techniques
- One-button AutoZero demagnetisation and control for ease of use, DC accuracy of ± 1% typical
- Easy access to displayed probe menu for control of probe configuration and operating status information. - Remote control capability via TekVPI oscilloscope, rise time ≤ 7ns, signal delay 17ns - Bare wire voltage 150V max. CAT II (300V CAT II insulated wire) - 1,000 A/µS ampere/second maximum - Operating temperature range 0°C to +50°C, operation 5% to 95% RH, tested to +30°C (+86°F) - Regulatory safety CSA1010.1:1997, CSA1010.2.032-96, IEC61010-1:2001, IEC61010-2-032 approved - Probe head dimensions 30.5mm x 15.2mm x 148mm (H x W x L), cable length 2m and probe weight 0.227kg Translated with DeepL.com (free version) |