CA60 - Current probe 20/60A TRMS AC/DC banana

Sku: 293021
The strong points
  • 0 to 20 A and 0 to 60 A dual-range. Bandwidth of 20kHz

€83.89 €100.67
- +
Replenishment in progress

The DCA60 can be used with an oscilloscope, a multimeter, or a recorder. It outputs a secondary voltage proportional to the primary current of a few tens of millivolts, allowing measurements to be taken safely and without interrupting the circuit. The integrated Hall effect sensor detects a DC component superimposed on the AC component. When connected to a true RMS multimeter, these probes then display a true RMS current measurement.

Type de courant AC/DC
Caractéristiques techniques
  • IEC1010-1, IEC1010-2-032 Safety, CAT II 300V
  • CE Approved
  • Jaw Opening Capacity: 9 mm conductor
  • Dimensions: 195x70x33mm
  • Weight: approximately 250g
  • To be used with any multimeter with ranges of 200 mV and/or 2 V for direct reading
  • Input Impedance of at least 1 MΩ
  • LED lights up when the clamp is energized
  • DCA ZERO
  • Transformation Ratio: 10:1, 100:1
  • Output: 1mV/10mA, 1mV/100mA
  • Current Range: 0 to 60A
  • Accuracy: DCA Â± 1.5%

ACA Â± 2% (40Hz - 2kHz)
ACA ± 4% (2k - 10kHz)
ACA Â± 6% (10k - 20kHz)