Metrix GX305 5 MHz Function Generator

Sku: 291956
Metrix
The strong points
  • Simultaneous display of signal parameters (VDC, Vrms or Vpp, waveform, etc.) Large 125 x 45 mm LCD screen, with main display on 5 digits 20 mm high LIN or LOG scan, triangle or tooth saw, with adjustable duration from 10 ms to 100 s Inputs and outputs protected 60 VDC and 40 VAC

€493.00 €591.60
- +
On order

1 function generator 1 mains power cord 1 CD Rom containing:
- 1 operating manual in 5 languages
- 1 FR + GB programming manual
- Labwindows CVI / LabView drivers

Nombre de voies 1
Fréquence max 5 MHz
Caractéristiques techniques
Signals: sine, square, triangle and TTL
Frequency range: 0.01 Hz to 5.000 MHz
Voltage levels: 1 mV to 20.0 Vdc open circuit in 3 automatic ranges, 3 digit Vpp or Vrms display, max resolution 1 mV
Frequency sweep:
- LIN (linear) or LOG (logarithmic)
- INTERNAL. 'Sawtooth' or 'Triangle' mode unlimited excursion between 'F Start' and 'F Stop' (256 steps). Sweep time adjustable from 10 ms to 100 s. Sweep signal output on BNC 'Sweep Out', level approx. 3.5 V, impedance approx. 10 kΩ.
- EXTERNAL. Scanning by a signal 15 kHz, amplitude ± 10 V. VCF IN input impedance 10 kΩ approx.
External frequency meter: from 5 Hz to 100 MHz, accuracy of 0.05%
Power supply: mains 230 V ±10% (or 115 V ±10%), 50/60 Hz, 20 VA max., removable cord
Safety: IEC 61010-1 (2001) - EMC according to EN 61326-1 (2004)
Dimensions (W x H x D): 227 x 116 x 180 mm
Mass: 2.8 Kg
Warranty: 3 years
Supplied with: 1 power cord, 1 CD-ROM containing 1 operating manual in 5 languages.